The main reasons for car paint detachment
1. During car painting, the surface of the car may not be cleaned thoroughly, resulting in oil, dust, moisture, etc;
2. The substrate should not be too lubricated, which can also cause poor adhesion of the car paint film;
3. When spraying the primer, if the primer film is too thick or too hard, it will also make it difficult for the paint film to adhere;
4. The baking temperature after car paint spraying is too high, perhaps the baking time is too long or too short;
5. Excessive humidity in the construction environment can also cause large areas of car paint to fall off.
What if the car peels off the paint during an attack? Without a doubt, touch up the paint! Car paint peeling can affect aesthetics, and over time, it will continue to expand. If the metal substrate is exposed and rusts, it should be repaired. During the repair process, it is necessary to pay attention to the treatment of the substrate, polish it rough, and not too lubricating. The baking temperature and time should be paid attention to the construction environment.
Article source: Automotive repair paint http://www.jinliangxincai.com
-
08-25
Common problems with automotive repair paint
Why are the orange lines on the surface of the varnish so heavy after each spray? Why on earth? How can we prevent a decrease?Answer: The thinness of the varnish, the amount of paint produced by the s
-
06-05
The car repair paint manufacturer told you about the problem with water-based coatings
1. How long does it take for a skilled paint coating technician to master the operation of water paint?Generally, practice and understanding with less than half a sound can be mastered, and proficienc
-
05-31
Qingyuan Automobile Repair Paint Company tells you the steps for painting
Automotive Painting Process(1) Rust prevention and internal painting of the vehicle body: Depending on the condition of the vehicle body, it will be completed by a sheet metal worker.(2) Polishing and
-
05-12
Why does car repair paint lack luster?
If there is a lack of gloss on the surface of the originally flat and smooth car paint surface, especially during the process of car paint care, it can be observed under a microscope that the surface